Islands & Inlets is a set of 3d printable terrain and scenery for naval wargames, suitable for scales from 1/600 to 1/1400. Whether you play fantasy, historical, alternate history or even sci-fi naval games, Islands & Inlets will provide you with all the scenery you need to fill your gaming table. Some of the pieces will also work great for other small scale land-based games (6-10mm) and certain pieces also work well for 28mm scale gaming (the vase mode shorelines make great large scale hills!).
Refer to the kickstarter page here for a full preview of the contents.
This product contains the following 49 sets of STLs:
Set #1 - Islands
- Twelve islands of various sizes.
- Detailed with beaches and caves.
- Designed for 1/600 to 1/1200 scale, but can be upscaled or downscaled with ease.
Set #2 - Shorelines
- Four vast shorelines, over 100 inches in total length!
- Two straight shorelines, one corner and one peninsula.
- Mostly Vase Mode compatible for rapid printing.
Set #3 - Vase Mode Islands
- Twelve simple islands with flat surfaces to add further modelling to.
- Vase Mode enables rapid printing at high detail, for example the huge shoreline in the main photograph is 36" long and was printed in a single day with around 100g of filament.
- Low material usage makes for very affordable printing!
Set #4 - Sandbars
- Twelve sandbars of various sizes.
- Variants with holes to make Filament Palm Trees are included!
Set #5 - Rocky Outcrops
- Twelve Rocky Outcrops of various sizes.
- Fully detailed with caves, lagoons and other features.
Set #6 - Modular Harbours
- A selection of pieces which can be combined with the islands and sandbanks and shorelines in slicer software to create your own harbour pieces.
- Features a selection of stone and wooden jetties, along with portside plazas and buildings.
- A variety of pre-combined, ready-to-print harbour terrain pieces are also included as an alternate option.
Set #7 - Coral Reefs
This set features a selection of 12 jagged coral reefs jutting out of the water.
Set #8 - Volcano Lagoon
This set features a selection of 12 volcanoes in various sizes.
Set #9 - Modular Coastal Defences
This set features shore forts, and modular walls, towers and gun emplacements which can be added to islands, sand banks using the same process as the modular harbours. build your own custom island fortresses!
Set #10 - Modular Coastal Settlements
A selection of houses, taverns, lighthouses and other civilian buildings to add to your island scenery, either as seperate pieces to sit on top of the flat vase mode islands, or to add directly to the islands in the slicer, using the same modular format as the harbours and coastal defences.
Set #11 - Icebergs
A selection of 12 dangerous icebergs for your ships to navigate.
Set #12 - Sea Ice
Large sea ice pieces to either have free-floating or along the edge of the table. These are designed to print very well using clear filament for an excellent icy effect.
Set #13 - Rocky Arches
A selection of 12 rocky sea arches in various sizes.
Set #14 - Skull Island
A large island featuring a mountain carved into an ominous skull shape.
Set #15 - Barbarian Defences
A selection of modular defences formed from wood, bone and skins.
Set #16 - Barbarian Settlements
A selection of huts, fire pits and totems made from wood, bone and skins.
Set #17 - Elven Defences
Smooth spires crafted by elven magic pierce the sky.
Set #18 - Elven Settlements
Delicate elven villages and runic artworks form these elven settlements.
Set #19 - Dwarven Defences
Large, blocky fortresses of granite and iron form the dwarf defences.
Set #20 - Dwarven Settlements
Sturdy practical houses, some of which are carved into mountains.
Set #21 - Undead Defences
An eerie ruined fortress, surrounded by bones.
Set #22 - Undead Settlements
An ancient abandoned settlement, with an unusually large graveyard.
Set #23 - Demon Defences
Twisted spiky defences warn the unwary voyager to steer clear.
Set #24 - Demon Settlements
Dark huts glow with a bizarre red light, but appear to be completely empty.
Set #25 - Steampunk Fortifications
Armoured turrets and airship docks surround this fortress of industry.
Set #26 - Crushing Rocks
A pair of jagged rocks which fit together and can crush unsuspecting vessels
Set #27 - Isle of Sorcery
A mysterious island with stone circles and a magical vortex
Set #28 - Isle of Bones
This island is covered in the bones of gargantuan sea monsters, where might they have come from?
Set #29 - Abyssal Island
This jagged plateau just out of the sea and has a vast and seemingly bottomless chasm running across it.
Set #30 - Isle of Dust
The inhabitants of this island died long ago, but left behind great pyramids.
Set #31 - Isle of the Ancients
Classical pillars and ruins cover this island, watch out for harpies!
Set #32 - Giants Causeway
A series of hexagonal stone pillars used by the giants of old to march between islands.
Set #33 - Crystal Island
The air is filled with a humming sound on this island covered in magical glowing crystals
Set #34 - Floating Islands
The power of flight is needed to visit these islands and their odd blue-skinned inhabitants.
Set #35 - Turtle Island
A peaceful civilization lives on the back of this very friendly ancient turtle.
Set #36 - Isle of Steam
Cogs whirr and giant brass towers belch steam on this brass-covered island which crackles with electricity.
Set #37 - Isle of Steel
Metal armour covers this island, hiding the secrets contained within.
Set #38 - Monster Island
This island appears to be perfectly normal from a distance, but when prey ships approach, it reveals its true form.
Set #39 - The Krakenfort
A colossal fortress built to guard against sea monsters, although almost none have been spotted in the area for centuries.
Set #40 - Whirlpools
Giant whirlpools lead to a fate unknown.
Set #41 - Underground Ocean Caverns
A huge set of terrain, enough shorelines to form the edges of a gaming table, along with freestanding pieces to fill out the cavernous passages within. These caverns will be Vase Mode compatible so you can print a whole table really quickly and will also be incredibly useful for other games which require any kind of underground cavern terrain.
Set #42 - Atlantis
An ancient sunken city lost to time, with giant white pyramids surrounded by stone columns, each topped with crackling orbs of light.
Set #43 - Jörmungandr, The World Serpent
This is a colossal sea serpent whose presence can cover an entire battlefield. He will be provided as a series of body sections (loops of his body rising from beneath the waves), along with a head and tail section. You can print out as many or few of the body sections as you want, to make Jörmungandr as long as you want him to be, with a large enough printer he can even stretch around the world!
Set #44 - Ship Bases
A set of low-profile bases suitable for Naval Gaming, which are also suitable for other small-scale games in 6mm-10mm scale. These are designed to print in 5 layers of PLA at .25 layer height, which allows for good results with clear filament, so they may also be of use for rpgs or games where you want to see the printed surface underneath and have the base be as minimal as possible. All sizes from 5x5mm to 100x100mm are covered (in 5mm increments) with options for 1.25mm or 2mm thickness and either 2x1mm, 3x1mm or 4x1mm disc magnets underneath for ease of storage.
Set #45 - Island Bases
A set of ultra-thin "footprint" bases for all the islands in set #01. These are designed to be printed in clear PLA or resin (with the thickness increased) and mark out the area that is either 1" or 2" away from the island. This is a useful gaming aid for gaming systems such as KoW: Armada where a ship coming close to an island risks hitting it. Additionally, these extra bases can be used for you to model an extended beach on to an island, simply add the island to its base in the slicer, print it as one piece, then add texture paint afterwards to make a beach.
Set #46 - Shoreline Bases
A set of ultra-thin "footprint" bases for the shorelines in set #02. These follow the same format as the island bases, but made for all four of the massive shoreline pieces instead.
Set #47 - Compass Rose
A detailed printable compass rose which can be used as a gaming aid to indicate wind direction in-game.
Set #48 - Sandy Shores
Simple sandy shorelines to add to the edges of gaming tables will be provided in a similar format to the other shorelines (two straight shorelines, one corner and one peninsula). Great for adding extra texture, foliage or buildings too.
Set #49 - Rocky Shores
An extra scenery set similar to the sandy shorelines, with additional rocky detail (similar to the Islands pack with both a beach and a landmass). This scenery set is designed for use on the edges of gaming tables and will be provided in a similar format to the other shorelines (two straight shorelines, one corner and one peninsula).
